Images
Details
https://trade.supercheapauto.co.nz/p/lyndar-lyndar-aerosol-touch-up-paint---300g/601102.htmlPromotions
We Can Fit This!
Additional Information
Product Info
Product Info
Fixing dings and scratches can be fast, simple and yield professional results when using the Lyndar Premium Paint System. Used in professional body shops, the Lyndar system enables accurate colour matching of over 90,000 paint codes, covering a majority of vehicles on the road. By simply providing your vehicles paint code our team can mix you anywhere from 50mL to 2L while you wait
The easy press, wide spray nozzle found on this 300g can provides even coverage to 1mยฒ. For further depth and gloss a Lyndar clear coat should always be applied, this also seals the finish and provides UV protection.
For further infomation on performing your own paint repairs, see our handy How-To Guides.
Paint mixed to the original paint code may not match older vehicles with faded finishes or discoloured...
Show more +Features
- Acrylic based refinishing paint designed for use on a wide range of primed surfaces
- Wide, easy press nozzle provides superior, even coverage and great gloss straight off the can
- Clear-Over-Base system used by professional body shops for factory finish repairs
- Advanced colour matching technology enables mixing of over 90,000 colours
- Solid, metallic and pearl finish paints available to suit a wide range of vehicle paint codes
Tech Spec
| Volume: | N/A |
|---|---|
| Weight: | 300g |
| Colour / Finish: | Various Colours Available |
| Characteristics: | |
| Base: | Acrylic |
| Paint Type: | Base Coat |
| Heat Resistant: | N/A |
| Preparation: | |
| Surface Preparation: | Clean surface with Wax & Grease Remover |
| Suitable Primer: | Prime cleaned surface with a suitable primer from within the Lyndar Primer Range |
| Application: | |
| Application Method: | Aerosol |
| Suitable Substrates: | Suitably Primed Metal, Plastic & Fibreglass |
| Recommended Application Temperature: | 17-30 degrees celsius |
| Recommended Application Humidity: | Below 80% |
| Finishing: | |
| Suitable Top Coat Clear: | Lyndar Clearcoat |
| Coverage: | |
| Coverage: | 1m2 |
| Number of Coats Recommended: | 3-5 coats |
| Drying: | |
| Touch Dry Time: | 5 minutes |
| Re-Coat Time: | 10-15 minutes |
| Full Cure Time: | 40 minutes |
| Clean Up: | |
| Clean Up: | Lyndar Acrylic Thinner |